8. Support new models such as W223 c206 213 167.
M6 Product Functions | M6+ Product Functions | M6+ Pro Functions | |
XENTRY | √ | √ | √ |
XENTRY Truck | √ | √ | √ |
DTS | √ | √ | √ |
VIDEO | √ | √ | √ |
MB DOIP | √ | √ | √ |
MB WIFI | √ | √ | √ |
PC USB | × | √ | √ |
PC RJ45 | √ | × | √ |
Vehicle Voltage Real-time Display | × | × | √ |
BWM Aicoder | × | √ | √ |
BWM E-SYS | × | √ | √ |
BWM APP | × | √ | √ |
Other DOIP | × | √ | √ |
M6+ Pro Connection Instructions
M6+ PRO Mercedes-Benz and BMW configuration
1. Plug the M6+PRO into the power supply or connect the OBD to the test vehicle, and plug in the USB/LAN cable of the M6+PRO.
2. Turn on the computer and plug in the computer USB/LAN cable.
3. Open the computer network configuration interface and find the Realtek USB FE Family Controller network/the network adapter that comes with the PC.
4. Click “Properties”–TCP/IPV4, and set the IP address as shown in the figure below.
5. Click “Advanced”, and add a group of network IP addresses as shown in the figure below.
6. Click “OK”. After the configuration is successful, the display is as follows.
7.For the same computer, if you replace a new M6+PRO, you need to reset the IP address. After the setting is completed, the computer is successfully bound to the M6+PRO and there is no need to set the IP address again for wired and wireless Internet access. (Use LAN port connection mode, no need to re-set IP when changing devices).
8.You can test Mercedes-Benz normally. Please connect the diagnostic cable with SUPER MB PRO logo.
9. BMW wireless BMWAiCode configuration(only for F+G chassis)
Connect to the M6+PRO -***, password:123456789, wirelessly, press and hold the M6+PRO switch button for 3 seconds, and the M6+PRO host wireless indicator will flash. The computer-side BMWAiCoder configuration is as follows:
10. BMW wired BMWAiCode configuration(only for F+G chassis)
Connect the USB/LAN cable, press and hold the M6+PRO switch button for 3S, and the M6+PRO host wired indicator light will flash. The computer-side BMWAiCoder configuration is as follows:
11. BMW wired and wireless E-Sys configuration(only for F+G chassis)
Connect to the M6+PRO -*** wirelessly, press and hold the M6+PRO switch button for 3 seconds, and the M6+PRO host wireless indicator will flash. On the computer side, select the following for direct connection. Wired is similar, no setup required.
12. BMW wired ISTA configuration(only for F+G chassis)
Connect the USB cable, press and hold the M6+PRO switch button for 3S, and the M6+PRO host wired indicator light will flash. The computer ISTA configuration is as follows:
13. BMW Wireless ISTA configuration(only for F+G chassis)
Connect to the M6+PRO -*** wirelessly, press and hold the M6+PRO switch button for 3 seconds, and the M6+PRO host wireless indicator will flash. The computer side is selected as follows:
14.The mobile phone BWM APP adopts wireless connection. (only for F+G chassis)
Connect to the M6+PRO -***, password: 123456789, press and hold the M6+PRO switch button for 3 seconds, and the M6+PRO host wireless indicator will flash.
15. Supported BMW models and years.
Model Year | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 |
X1 | √ | √ | √ | √ | |||||||
X3 | √ | √ | √ | √ | √ | √ | √ | × | |||
X4 | √ | √ | √ | √ | √ | √ | |||||
X5 | √ | √ | √ | √ | √ | √ | × | ||||
X6 | √ | √ | √ | √ | √ | × | |||||
1 Series | √ | √ | √ | √ | √ | √ | √ | √ | × | ||
2 Series | √ | √ | √ | √ | √ | √ | √ | √ | |||
3 Series | √ | √ | √ | √ | √ | √ | √ | × | |||
4 Series | √ | √ | √ | √ | √ | √ | √ | ||||
5 Series | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | × |
6 Series | √ | √ | √ | √ | √ | √ | √ | √ | × | ||
7 Series | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ |
Product Accessories Comparison Chart
SUPER MB PRO M6+PRO FULL | 1pc x SUPER MB PRO M6+ Pro Host 1pc x OBD2 16pin Cable 1pc x USB Cable 1pc x 38PIN Cable 1pc x 14PIN Cable 1pc x 4PIN Cable |
SUPER MB PRO M6+PRO OBD | 1pc x SUPER MB PRO M6+ Pro Host 1pc x OBD2 16pin Cable 1pc x USB cable |
SUPER MB PRO M6+PRO Truck | 1pc x SUPER MB PRO M6+ Pro Host 1pc x OBD2 16pin Cable 1pc x USB cable 1pc x 14PIN Cable |
Package Includes:
sales@obdstars.com
x***j –
Delivered quickly to the threshold,Connected the first time. Counted recorded without problems.
J***; –
great, great, great, fast shipping, everything is there and work. thank you
M***S –
OK, TOP seller, good supporrt…
a***i –
Delivery fast everything works!!!
j***g –
Fast delivery, good package, good price. Hope everything works as it should.
H***i –
Everything ok
k***n –
Product as described request. Very fast. Recommend all p.
J***O –
Product as advertised. Delivery superápida. Recommend to everyone.
E***S –
Everything's okay.
e***y –
Great product arrived super fast via office for Brasil recommend.
N***r –
Excellent equals description
u***t –
The goods came quickly enough, packed perfectly, checked works!
E***a –
very good are satisfied with fast shipping
d***z –
Very good fast delivery
p***b –
Do not have time to test right now, looks great
P***Y –
The delivery was fast, all came days in 10.
S***a –
It works perfectly as you can see.
P***z –
fast
P***u –
Okay.
F***d –
Everything seems ok, but not yet tried
J***n –
Will be than to check, i will add. So everything is wonderful.
D***a –
It works perfectly! Very good product, i recommend shop and seller.